UFmembrane module--UF1IB160 (PS)

1. good hydrophilic ,big flux 2.high intensity , norupture ,long life 3.simply cleaning , good flux

Main Technical Specification

Module type	Inside-in Polysulfone hollow fiber
Shell material	UPVC
Membrane Material	Hydrophilic Polysulfone
Molecular Weight Cut off	10000,67000,100000 Dal
Dimension(mm)	160*1100
Area	20 m2
Hollow fiber inner/outer diameter	1.0mm/1.5mm
Max operating pressure	0.3MPa
Design water flux	1.0-2.0m3/h
Raw water turbidity	<50NTU
Max operating temperature	45°C
Operating mode	Cross flow or dead-end flow
Bacteria removal rate	>4log
Permeate turbidity	<0.1NTU
PH range	2-13
Weight	22.5kg

   

Application area:

Filtration waste-water after biochemical treatment, removing bacteria and purifying tap water and surface water purification, pretreatment for reverse osmosis systems, end-treatment for the ultra pure water system, and sea water desalination, purifying and recycling industrial waste-water, concentration and separation applied on chemical industries.UF membrane separating, concentrating and purifying substance has outstanding advantages as below:1) No change of phase in the process of UF, operating at normal substance .Atmospheric temperature, saving energy, no any pollution to separate.2) Chemicals anti-corrosion, wide PH range.3) Simple separating process, easy to operate, low cost to maintain, easy to Clean.

UFmembrane module--UF1IB160 (PS)